View CLI700_4610340.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CLI700
IRED - Photo-IC Reflective Object Sensor
0.500(12.7) min. 0.175 (4.46) 0.165 (4.21) 1. Vcc 2. Anode 0.100 Dia 3 0.187 (4.75) 0.179 (4.55) 2 1 0.021 (0.53) Dia 0.017 (0.43) 4 Places 3 0.030 (0.76) max. 0.160 (4.08) Emitting Window 0.150 (3.81) Diameter 0.230 (5.84) 0.209 (5.31) 45
(R)
Clairex
Technologies, Inc. March, 2002
Internally
3. Output 4. Ground
4 connected
to header
0.048 (1.22) 0.028 (0.71)
0.046 (1.17) 0.036 (0.91)
0.020 (0.50) Diameter Detection Area
2
1 3
4
ALL DIMENSIONS ARE IN INCHES (MILLIMETERS)
features * 0.020" dia. light pipe aperture * T0-72 package * Buffer, open collector output description The CLI700 consists of an 880nm AlGaAs IRED and a buffer, open collector photo-IC mounted on a custom TO-72 header. The IRED emits a broad radiation pattern through the formed clear epoxy lens. Radiation reflected from the target is received by a 0.020" diameter fiber optic light pipe attached to the active area of the photo-IC. Other photo-IC options are available. See the CLL series data sheet on our website.
absolute maximum ratings (TA = 25C unless otherwise stated) storage temperature ........................................................................ -40C to +125C operating temperature ..................................................................... -40C to +100C lead soldering temperature(1) ........................................................................... 260C IRED continuous forward DC current(2) ......................................................................35mA reverse DC voltage................................................................................................5V continuous power dissipation(3)......................................................................100mW PHOTO-IC supply voltage......................................................................................... 4.5V to 18V output sink current ............................................................................................25mA voltage at output lead (open collector) ................................................................30V note: 1. 0.06" (1.5mm) from the header for 5 seconds maximum 2. Derate linearly 0.37mA/C from 25C free air temperature to TA = +100C. 3. Derate linearly 1.07mW/C from 25C free air temperature to TA = +100C. definition: Output is buffer, open collector. Output is HIGH (OFF) when reflected light is sensed and LOW (ON) when reflected light is not sensed.
electrical characteristics (TA = 25C and VCC = 5.0V unless otherwise noted) symbol VF IR P BW ICC VOL parameter IRED forward voltage IRED reverse current Peak emission wavelength Spectral bandwidth at half power points Sensor supply current Low level output voltage(4) min typ 1.50 880 80 4.0 0.3 0.5 12 200 max 1.65 10 10.0 0.5 0.8 1.0 7.0 500 80 units V A nm nm mA V V A mA % ns s test conditions IF = 20mA VR = 5V IF = 20mA IF = 20mA VCC=15V IC = 15mA, IF = 0 or 35mA IC = 25mA, IF = 0 or 35mA IF = 35mA, VOH = 25V d = 0.03 inches RL=200, duty cycle = 50% RL=200, duty cycle = 50%
High level output current(5) IOH Turn-on threshold (IRED current) (5) IFT IF(+)/IF(-) Hysteresis tr, tf Output rise and fall time tP Propagation delay notes: 4. No reflective surface. 5. Measured using a Kodak 90% diffuse reflectance neutral white test card.
Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.
Revised 3/16/06
Clairex Technologies, Inc. Phone: 972-265-4900
1301 East Plano Parkway Fax: 972-265-4949
Plano, Texas 75074-8524 www.clairex.com

▲Up To Search▲

Price & Availability of CLI700

	To Download CLI700 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .